| Test | Specification...BP |
| Character | It occurs as a white or almost white, crystalline powder or colorless crystals. |
| Identification Test(A) Test(B) | (a) It gives the reactions of chlorides. (b) 10mL of solution S gives thereaction of ammonium salts. |
| Solubility | Freely soluble in water |
| Appearance of solution | Solution S is clear and colorless. |
| Acidity or alkalinity | Specified test. |
| Bromides and Iodides | Specified Test. The chloroform layer remains colorless. |
| Sulfate | Not more than 150ppm |
| Calcium | Not more than 200ppm |
| Iron | Not more than 20ppm |
| Heavy Metal | Not more than 10ppm |
| Loss on drying | Not more than 1.0% |
| Sulfated Ash | Not more than 0.1% |
| Assay | Not less than 99.0% and not more than 100.5% on dried substance |
Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.
Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.
| Test | Specification...IP |
| Character | It occurs as a colorless crystals or white, crystalline powder |
| Identification Test(A) | (a) It gives thereactions of ammonium salts and chlorides |
| Solubility | Freely soluble in water, sparingly soluble in ethanol (95%) |
| Appearance of solution | A 10.0% solution is clear and colorless. |
| pH | 4.5-6.0 |
| Arsenic | Not more than 4 ppm |
| Heavy metals | Not more than 10 ppm |
| Iron | Not more than 20 ppm |
| Calcium | Not more than 200 ppm |
| Sulfates | Not more than 150 ppm |
| Thiocyanate | Specified test. No red color is produced. |
| Sulfated Ash | Not more than 0.1% |
| Loss on drying | Not more than 1.0% |
| Assay | Not less than 99.0% and not more than 100.5%, calculated on the dried basis |
Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.
Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.
| Test | Specification...FCC |
| Characters | It occurs as colorless crystals or as a white, fine or coarse, crystalline powder, somewhat hygroscopic |
| Identification Test(A) | (a) A 1:10 aqueous solution gives positive tests for ammonium and for Chloride. |
| Solubility | One-gram dissolves in 2.6mL of water at 25°, in 1.4mL of boiling water, in about 100mL of alcohol, and in about 8mL of glycerin. |
| pH | Between 4.5 and 6.0 |
| Lead | Not more than 4mg/kg |
| Loss on drying | Not more than 0.5% |
| Assay | Not less than 99.0% of NH4Cl after drying |
Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.
Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.
| Test | Specification...USP |
| Characters | It occurs as a colorless crystal or white, fine or coarse, crystalline powder. |
| Identification Test A | (a) A solution (1 in 10) responds to the test for Chloride and ammonium |
| Solubility | Freely soluble in water and in glycerin, and even more so in boiling water; sparingly soluble in alcohol |
| pH | 4.6 and 6.0 |
| Loss on Drying | Not more than 0.5% |
| Residue on ignition | Not more than 0.1% |
| Sulfated Ash | Not more than 0.1% |
| Limit of thiocyanate | Specified test. No orange red- color is produced |
| Heavy metals | Not more than 0.001% |
| Residual Solvents | Meets the requirements |
| Assay | Not less than 99.5% and not more than 100.5% calculated on dried basis |
Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.
Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.
| Test | Specification...ACS |
| pH of a 5% solution | 4.5-5.5 at 25C |
| Insoluble matter | Not more than 0.005% |
| Residue after ignition | Not more than 0.01% |
| Calcium (Ca) | Not more than 0.001% |
| Magnesium (Mg) | Not more than 5 ppm |
| Heavy metals (as Pb) | Not more than 5 ppm |
| Iron (Fe) | Not more than 2 ppm |
| Phosphate (PO4) | Not more than 2 ppm |
| Sulfate (SO4) | Not more than 0.002% |
| Assay | Not less than 99.5% NH4Cl |
Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.
Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.