Manganese Chloride BP USP NF IP Reagent FCC Food Grade Manufacturers Exporters
Back

Manganese Chloride

Test Specification...FCC
Characters It occurs as large, irregular, pink, translucent crystals.
Identification Test A (a) A 1:20 aqueous solution gives positive tests for Manganese and for Chloride,
Solubility It is freely soluble in water at room temperature and very soluble in hot water.
Insoluble Matter Not more than 0.005%.
Iron Not more than 5 mg/kg.
Lead Not more than 4 mg/kg.
pH of a 5% Solution Between 4.0 and 6.0.
Substances Not Precipitated by Sulfide Not more than 0.2%, after ignition.
Sulfate Not more than 0.005%.
Assay Not less than 98.0% and not more than 102.0%
Test Specification...ACS
Characters It occurs as large, irregular, pink, translucent crystals.
Insoluble matter Maximum 0.005%
Sulfate (SO4) Maximum 0.005%
Heavy metals (as Pb) Maximum 5 ppm
Iron (Fe) Maximum 5 ppm
Calcium (Ca) Maximum 0.005%
Magnesium (Mg) Maximum 0.005%
Potassium (K) Maximum 0.01%
Sodium (Na) Maximum 0.05%
Zinc (Zn) Maximum 0.005%
pH of a 5% solution 3.5-6.0 at 25C
Assay Not less than 98.0% and not more than 101.0%

Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.

Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.

Enquiry