Test |
Specification...BP |
Characters |
It occurs as a white or almost white, hygroscopic powder |
Identification
Test A
Test B |
(a)It gives reaction of calcium
(b)It gives reaction of acetates |
Solubility |
Freely soluble in water, slightly soluble in ethanol (96%) |
Appearance of solution |
Solution S is clear and colorless |
pH |
Between 7.2 and 8.2 |
Fluoride |
Not more than 50ppm |
Arsenic |
Not more than 3ppm |
Lead |
Not more than 0.001% |
Magnesium |
Not more than 500ppm |
Chloride |
Not more than 330ppm |
Barium |
Not more than 50ppm |
Sulphate |
Not more than 600ppm |
Nitrates |
Specified Test. The blue color remains for at least 10 min. |
Readily oxidizable substances |
Specified Test |
Water |
Not more than 7.0% |
Heavy metals |
Not more than 10ppm |
Assay |
Not less than 99.0% and not more than 101.0% on the anhydrous basis. |
Test |
Specification...Ph Eur |
Characters |
It occurs as a white or almost white, hygroscopic powder |
Identification
Test A
Test B |
(a)It gives reaction of calcium
(b)It gives reaction of acetates |
Solubility |
Freely soluble in water, slightly soluble in ethanol (96%) |
Appearance of solution |
Solution S is clear and colorless |
pH |
Between 7.2 and 8.2 |
Fluoride |
Not more than 50ppm |
Arsenic |
Not more than 3ppm |
Lead |
Not more than 0.001% |
Magnesium |
Not more than 500ppm |
Chloride |
Not more than 330ppm |
Barium |
Not more than 50ppm |
Sulphate |
Not more than 600ppm |
Nitrates |
Specified Test. The blue color remains for at least 10 min. |
Readily oxidizable substances |
Specified Test |
Water |
Not more than 7% |
Assay |
Not less than 99.0% and not more than 101.0% on the anhydrous basis. |
Test |
Specification...USP |
Characters |
It occurs as a white crystalline powder |
Identification
Test (A) |
(a)A solution (1 in 20) responds to the test for calcium and for acetate. |
Solubility |
Freely soluble in water; slightly soluble in methanol; practically insoluble in acetone, in dehydrated alcohol, and in benzene. |
pH |
Between 6.3 and 9.6 |
Water |
Not more than 7% |
Heavy metals |
Not more than 25 ppm |
Lead |
Not more than 10 ppm |
Sulfate |
Not more than 10ppm |
Assay |
Not less than 99.0% on the anhydrous basis. |
Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.
Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.
Enquiry