Test | Specification...BP |
Characters | It occurs as white or almost white, fine, amorphous powder. |
Identification
Test (A) Test (B) |
(a)Gives the reaction of magnesium (b)Loss on ignition |
Solubility | Practically insoluble in water. It dissolves in dilute acids. |
Appearance of solution | The solution is not more intensely colored than the reference solution |
Soluble substances | Not more than 2.0% |
Substances insoluble in acetic acid | Not more than 0.1% |
Chlorides | Not more than 0.1% |
Sulphates | Not more than 1.0% |
Arsenic | Not more than 4 ppm |
Calcium | Not more than 1.5% |
Iron | Not more than 0.07% |
Heavy Metals | Not more than 30 ppm |
Loss on ignition | 29.0% to 32.5% |
Assay | Not less than 95.0% and not more than 100.5% of Mg(OH)2 |
Test | Specification...IP |
Appearance | A bulky white powder |
Solubility | Practically insoluble in water. It dissolves in dilute acids |
Appearance of solution | The solution is not more intensely colored than the reference solution |
Arsenic | Maximum 4ppm |
Heavy metals | Maximum 30ppm |
Iron | Maximum 0.08% |
Chlorides | Maximum 0.1% |
Sulphates | Maximum 0.5% |
Calcium | Maximum 1.5% |
Soluble substances | Maximum 1% |
Substances insoluble in acetic acid | Maximum 0.1% |
Loss on ignition | Between 30% and 32.5% |
Assay | Not less than 95% and not more than 100.5% |
Test | Specification...USP |
Appearance | White or almost white, fine, amorphous powder |
Solubility | Practically insoluble in water. It dissolves in dilute acids |
Appearance of solution | The solution is not more intensely colored than the reference solution |
Microbial enumeration test | Absence of Escherichia Coli |
Loss on drying | Maximum 2% |
Loss on ignition | Between 30% and 33% |
Soluble salts | Passes test |
Carbonate | Passes test |
Calcium | Maximum 1.5% |
Heavy metals | 20 micro-gm per gm |
Lead | Maximum 0.00015% |
Organic volatile impurities | Passes test |
Residual solvents | Passes test |
Assay | Not less than 95% and not more than 100.5% |
Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.
Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.