Acetic Acid Glacial BP USP NF IP Reagent FCC Food Grade Manufacturers Exporters
Back

Acetic Acid Glacial

Test Specification...BP
Characters It occurs as a crystalline mass or clear, colorless, volatile liquid.
Identification Test (A) Test (B) (a) A 100 g/L solution is strongly acidic. (b) To 0.03 mL add 3 mL of water R and neutralize with dilute sodium hydroxide solution R. The solution gives reactions of acetates
Solubility It is miscible with water, with alcohol (96%) and with methylene chloride
Appearances The substance to be examined is clear and colorless
Freezing Point Minimum 14.8OC
Reducing Substances Specified Test. Heat on a water-bath for 1 min, the color remains pink
Chlorides Not more than 25 mg/L
Sulfates Not more than 50 mg/L
Iron Not more than 5 ppm
Residue on Evaporation Not more than 0.01%
Heavy metals Not more than 5 ppm
Assay Not less than 99.0% and not more than 100.5%

Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.

Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.

Test Specification...FCC
Characters It occurs as a clear & colorless liquid
Identification Test for Acetate (a)A 1:3 aqueous solution gives positive tests for Acetate
Solubility It is miscible with water, with alcohol and with glycerin.
Lead Not more than 0.5 mg/kg
Nonvolatile Residue Not more than 0.005%
Readily oxidizable substances Specified Test.
Solidification Point Not more than 15.6O
Assay Not less than 99.5% and not more than 100.5% of C2H4O2

Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.

Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.

Test Specification...USP
Characters It occurs as a clear, colorless liquid, having a pungent, characteristic odor and, when well diluted with water, an acid taste
Identification Test for Acetate (a)The solution gives positive tests for Acetate
Solubility It is miscible with water, with alcohol and with glycerin.
Limit of Nonvolatile residue Not more than 1.0 mg
Heavy metals Not more than 5 ppm
Chlorides Specified test. No opalescence is produced.
Sulfates Specified Test. No turbidity is produced
Organic impurities- Readily oxidizable substances Specified Test. The pink color is not changed to brown within 2 h.
Congealing temperature Not less than 15.6°
Residual solvents Meets the requirement
Assay Not less than 99.5% and not more than 100.5% of C2H4O2

Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.

Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.

Enquiry