Dihydroxyaluminum Sodium Carbonate BP USP NF IP Reagent FCC Food Grade Manufacturers Exporters

Dihydroxyaluminum Sodium Carbonate

Test Specification...BP
Characters It occurs as fine, white, odorless powder
Identification Test (A)   Test (B) Test (C)   (a)  Specified test. The sample dissolves with effervescence. (b)  It gives test for Aluminum (c)   Specified test
Solubility Soluble in dilute mineral acids with the evolution of carbon dioxide; practically insoluble in water and in organic solvents.
pH Between 9.9–10.2
Mercury Not more than 1 ppm
Isopropyl Alcohol Not more than 1.0%
Sodium Content Between 15.2%–16.8%
Acid-Neutralizing Capacity Not less than 75.0% of the expected mEq value, calculated in relation to the results of the Assay
Loss on Drying Not more than 14.5%
Residual solvents Meets the requirements.
Assay Not less than 98.3% and not more than 107.9% on the dried basis

Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.

GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.