| Test | Specification...USP |
| Characters | It occurs as White, slightly hygroscopic powder |
| Identification Test(A) | (a)It responds to the test for Bismuth and for Nitrate |
| Solubility | Practically insoluble in water and in alcohol. Readily dissolved by hydrochloric acid or by nitric acid. |
| Loss on drying | Not more than 3.0% of its weight. |
| Carbonate | Specified Test. |
| Chlorides | Maximum 0.035% |
| Sulfates | Specified Test. No Turbidity is produced immediately. |
| Limits of Ammonium Salts | Specified Test. The vapor does not turn moistened red litmus paper blue. |
| Arsenic | Maximum 8 ppm |
| Copper | Specified Test. The liquid does not exhibit a bluish color |
| Lead | Specified Test. The liquid does not become cloudy |
| Silver | Specified Test. No precipitate is formed that is insoluble in a slight excess of hydrochloric acid, but that is soluble in 6 N ammonium hydroxide. |
| Alkalies & Alkaline earths | Not more than 0.5% |
| Residual Solvents | Meets the requirements |
| Assay | Not less than 79.0% of Bismuth Trioxide (Bi2O3), calculated on the dried basis |
Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.
Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.