Ammonium Chloride

Ammonium Chloride

Test Specification…..IP
Character It occurs as a colorless crystals or white, crystalline powder
Identification

Test(A)

 

(a) It gives the reactions of ammonium salts and chlorides

Solubility Freely soluble in water, sparingly soluble in ethanol (95%)
Appearance of solution A 10.0% solution is clear and colorless.
pH 4.5-6.0
Arsenic Not more than 4 ppm
Heavy metals Not more than 10 ppm
Iron Not more than 20 ppm
Calcium Not more than 200 ppm
Sulfates Not more than 150 ppm
Thiocyanate Specified test. No red color is produced.
Sulfated Ash Not more than 0.1%
Loss on drying Not more than 1.0%
Assay Not less than 99.0% and not more than 100.5%, calculated on the dried basis

Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.

Other
cGMP (FDA) Approved, WHO-GMP, ISO 9001: 2015, ISO14001:2015, ISO18001:2007, FSSC 22000: 2005, FSSAI, Kosher and Halal Certified.

Ammonium Chloride

Test Specification…..BP
Character It occurs as a white or almost white, crystalline powder or colorless crystals.
Identification

Test(A)

Test(B)

 

(a) It gives the reactions of chlorides.

(b) 10 mL of solution S gives the reaction of ammonium salts.

Solubility Freely soluble in water
Appearance of solution Solution S is clear and colorless.
Acidity or alkalinity Specified test.
Bromides and Iodides Specified Test. The chloroform layer remains colorless.
Sulfate Not more than 150 ppm
Calcium Not more than 200 ppm
Iron Not more than 20 ppm
Heavy Metal Not more than 10 ppm
Loss on drying Not more than 1.0%
Sulfated Ash Not more than 0.1%
Assay Not less than 99.0% and not more than 100.5% on dried substance

Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.

Other
cGMP (FDA) Approved, WHO-GMP, ISO 9001: 2015, ISO14001:2015, ISO18001:2007, FSSC 22000: 2005, FSSAI, Kosher and Halal Certified.

Ammonium Chloride

Test Specification…..USP
Characters It occurs as a colorless crystal or white, fine or coarse, crystalline powder.
Identification

Test A

 

(a) A solution (1 in 10) responds to the test for Chloride and ammonium

Solubility Freely soluble in water and in glycerin, and even more so in boiling water; sparingly soluble in alcohol
pH 4.6 and 6.0
Loss on Drying Not more than 0.5%
Residue on ignition Not more than 0.1%
Sulfated Ash Not more than 0.1%
Limit of thiocyanate Specified test. No orange red- color is produced
Heavy metals Not more than 0.001%
Residual Solvents Meets the requirements
Assay Not less than 99.5% and not more than 100.5% calculated on dried basis

Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.

Other
cGMP (FDA) Approved, WHO-GMP, ISO 9001: 2015, ISO14001:2015, ISO18001:2007, FSSC 22000: 2005, FSSAI, Kosher and Halal Certified.

Ammonium Chloride

Test Specification…..FCC
Characters It occurs as colorless crystals or as a white, fine or coarse, crystalline powder, somewhat hygroscopic
Identification

Test(A)

 

(a) A 1:10 aqueous solution gives positive tests for ammonium and for Chloride.

Solubility One-gram dissolves in 2.6mL of water at 25°, in 1.4mL of boiling water, in about 100mL of alcohol, and in about 8mL of glycerin.
pH Between 4.5 and 6.0
Lead Not more than 4mg/kg
Loss on drying Not more than 0.5%
Assay Not less than 99.0% of NH4Cl after drying

Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.

Other
cGMP (FDA) Approved, WHO-GMP, ISO 9001: 2015, ISO14001:2015, ISO18001:2007, FSSC 22000: 2005, FSSAI, Kosher and Halal Certified.

Ammonium Chloride

Test Specification…..ACS
pH of a 5% solution 4.5-5.5 at 25C
Insoluble matter Not more than 0.005%
Residue after ignition Not more than 0.01%
Calcium (Ca) Not more than 0.001%
Magnesium (Mg) Not more than 5 ppm
Heavy metals (as Pb) Not more than 5 ppm
Iron (Fe) Not more than 2 ppm
Phosphate (PO4) Not more than 2 ppm
Sulfate (SO4) Not more than 0.002%
Assay Not less than 99.5% NH4Cl

Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.

Other
cGMP (FDA) Approved, WHO-GMP, ISO 9001: 2015, ISO14001:2015, ISO18001:2007, FSSC 22000: 2005, FSSAI, Kosher and Halal Certified.